1. POWER Button: This button is used to turn the power supply for the LCD projector on and off.
2. RGB,VIDEO button: Used to switch between modes RGB (to project Laptop/PC screen) and VIDEO (to project VCR).
3. AUTO SETUP button: If this button is pressed while a picture is being projected, the projection settings will be adjusted automatically in accordance with the signal being input.
4. LASER button: A beam of laser light is emitted while this button is being pressed. This beam of light can be used as a pointer by directing it toward the screen.
5. MENU button: This button is used to display menu screens. When a menu screen is being displayed, it can be used to return to a previous screen or to clear the screen.
6. ARROW buttons (<, >, ^): These buttons are used to select and adjust items in the on-screen menu screens. When in computer operating mode, these buttons function in the same way as the mouse cursor button. While gently pressing the button with your thumb up, down and to the left and right to move the mouse cursor in the same direction. If you press gently, the cursor will move slowly, and if you press more firmly, the cursor will move more firmly. |
7. R-CLICK button: When the remote control receiver is connected to a personal computer by means of the accessory cable, this button operates in the same way as the right button on a standard mouse with two buttons, allowing the remote control unit to be used in place of the computer's mouse.
8. FREEZE button: This button momentarily freezes projection so that a still picture is displayed.
9. ZOOM +/- buttons: These buttons are used to enlarge certain portions of the projected image.
10. VOLUME +/- buttons: These buttons are used to adjust the volume of the sound output by the projector's built in speakers.
11. FUNC1 button: This button is used to change the settings for the optional function which has been assigned by the projector.
12. SHUTTER button: This button is used to momentarily turn off the picture and sound.
13. STD (standard) button: This button is used to reset the projector adjustment values to the default factory settings.
14. OPERATING MODE switch: Move this switch to the left to use the remote control unit to operate a computer, and move it to the right to operate the projector. |
